MONDO

Stabilising, waterproofing and insulating fibreglass underlay, treated on both sides with synthetic elastomeric resins, with a series of stems in expanded resin on the underside.
It can be dry-installed and forms a continuous base with excellent resistance to damp. Underlay suitable for Indoor Mondo sports floorings installed with polyurethane resin-based adhesives.
 

EVERLAY PRODUCTS:

• Can be installed without gluing to screed, even with residual humidity
• Facilitate the installation of sports flooring
• Do not form a thermal barrier if underfloor heating is used
• Make replacing the floor at the end of its lifecycle easier and cheaper

EVERLAY A

• Continuous, stabilising base with excellent resistance to damp
• Lighter weight makes it easier to handle during installation
• 20,000,000 m² sold worldwide

EVERLAY B

• Enables the temporary installation of a new floor that can easily be removed
• Good impact absorption
• Good soundproofing and noise reduction

EVERLAY EG

• Incredible energy-absorbing properties thanks to the special structure which combines a polyurethane layer with the conventional stabilising layer
• When combined with Mondoflex 4.0 mm and Mondosport I 3.5 mm, it guarantees impact resistance in accordance with EN 14904
• Improves the resilience of sports flooring

SIMPLIFIED INSTALLATION

Reduces laying time, avoiding the delays caused by screed maturing time. The use of Everlay underlays installed without adhesive onto suitably prepared surfaces will provide a continuous base with excellent resistance to damp, onto which the new flooring can be installed.

• Step 1
  Unroll Everlay onto the subfloor, placing the rolls next to each other.
• Step 2
  Spread the recommended adhesive onto the surface of Everlay.
• Step 3
  Glue on the top layer of flooring.