EVERLAY T
Stabilising, waterproofing and insulating fibreglass underlay, treated on both sides with synthetic elastomeric resins, with a series of stems in expanded resin on the underside.
It can be dry-installed and forms a continuous base with excellent resistance to damp. Underlay suitable for various floorings installed with polyurethane resin-based adhesives.
EVERLAY T
Everlay T assures:
- Excellent resistance to damp
- Good thermal insulation
- Excellent stabilisation
- Soundproofing and noise reduction
STEP 1
STEP 2
STEP 3
SIMPLIFIED INSTALLATION
Reduces laying time, avoiding the delays caused by screed maturing time. The use of Everlay underlays installed without adhesive onto suitably prepared surfaces will provide a continuous base with excellent resistance to damp, onto which the new flooring can be installed.
- Step 1
Unroll Everlay onto the subfloor, placing the rolls next to each other. - Step 2
Spread the recommended adhesive onto the surface of Everlay. - Step 3
Glue on the top layer of flooring.
DIMENSIONS
| Thickness | Roll Length | Roll Width | Weight |
| 0.05 (1.5 mm) | 82 (25 m) | 6'7" (2 m) | 0.29 lbs/pi² (1.42 kg/m²) |
3 Results
For further information
Latasha Pittman
Director of Communications & Marketing
Office: 847-869-1953
E-Fax: 847-556-6102
© 2009 MONDO S.p.A.- P.IVA 02500880048