Set of high competition futsal goal posts

PFS01 - PFS010

Set of two futsal goal posts for high competition. They have been designed, manufactured and certified to comply with the EN-749 Norm and the requirements of L.N.F.S.

The goal post is comprised of a frame and two rear bars. The rear bars can be horizontal (PFS01) or vertical (PFS10) depending on customer’s choice.

The two vertical posts and the crossbar of the frame are manufactured of an oval aluminium section measuring 80x80 mm. The rear frame has a double groove used to attach the posts and hooks to support the net.

It is painted in white and blue stripes at a pre-set distance established by L.N.F.S.

The vertical posts and the crossbar are joined on the inside by metal brackets made of a steel square section, which provides greater stability and rigidity.

The bottom parts of the posts are covered with polypropylene caps to protect the court floor from possible damage.

The attachment used to hook the net to the frame is made of blue polyamide and due to its design allow an easy and fast net attachment.

According to European regulations EN-749, the goal post must be fixed to the ground by fastening flanges that will secure the horizontal bars to the appropriate plugs located in the floor with the corresponding screws.

The product is painted with polyester powder paint, which is applied after a degreasing treatment using a pressurized phosphate bath and cured in an oven at 200ºC

All steel elements have been zinced.

Standard color: White and blue

Note: The goal is supplied completely dismounted. Nets and anchors are not included.


Set of high competition futsal goal posts PFS01
Set of high competition futsal goal posts PFS010