New MONDO SMART SYSTEM version of this classic lap counter, used for track and field events and other counting uses, whose purpose is to display the number of laps. It can work either in increasing or decreasing mode. It consists of two graphic screens of 32x32 cm. The control is made directly from the lap counter without any external devices. For this purpose, it has three buttons built directly into the lower part of the housing. A press on green increases the lap number, while a press on red decreases it. And the third button is used to reset the counter.
The main body consists of a triangular prism-shaped housing made of polyethylene (PE), and two 48x48 px (pitch 6 mm) LED displays placed on two of its three sides, forming a 120º angle to facilitate its correct visualization from any place. The third side has a closed finish and incorporates a metal sheet (removable from the bottom) on which the control boards are located.
The main body is made from rotational moulding PE C6 polyethylene with a density of 0.935 g/cm³, finished in a textured outer surface. This material has protection against ultraviolet UV rays and is unalterable to atmospheric agents.
The electronic lap counter works connected to the mains, and its maximum power consumption is 300 W.