New version MONDO SMART SYSTEM of the classic timer marker, used to measure time in long-duration races that take place along an interurban circuit, although it is also very useful for any other sports event such as athletic events or any other sports event in which it is necessary to countdown timings or short timings. It has a graphic surface of 74.5x25cm, through which we can show in addition to the elapsed or remaining time, any multimedia content such as logos of the current competition or small videos. The control of the scoreboard is carried out of a console with a touch screen, where in a simple and intuitive way it is possible to program the times shown, start, stop or reset the timing or choose which images or videos to play. For the latter, integrated into the case of the touch console we find a USB connector through which we can load the multimedia files contained in a memory device.
The scoreboard case is made of a 2.5mm thick extruded aluminum profile of our own design and the painting is done with polyester powder paint, its application being carried out after a degreasing treatment using a pressure phosphated bath and polymerized in an oven at 200°C.
The scoreboard is made up of three 52x52px (4.8 mm pitch) LED modules, which form a 156x52px graphic surface, where after a short period of power-on and system charging, the hours, minutes and seconds are indicated (maximum 9:59:59). In the last minute, the tenths and hundredths of a second are also displayed. This surface is frontally protected by a matte anti-reflective polycarbonate, which makes easy the good visibility in the presence of sunlight. For a correct visualization, the scoreboard incorporates a manual brightness control that can be modified from the control console itself.
The marker works connected to the electrical network, and its maximum consumption is 350W. The console is powered by the marker, so it does not need external power. The connection between the two is made through two cables supplied by MONDO.
The set is delivered in a box type “flight case” that makes easy its transport and protects it. A completely redesigned aluminum stand is supplied with the marker and can be disassembled for easy portability. All components are prepared to function under adverse atmospheric conditions.