Designed, Manufactured and Certified in accordance with the Regulations of the International Association of Athletics Federations - World Athletics.
(AC039 WA Certified: E-12-0674 / AC044 WA Certified: E-12-0675)
The Steeplechase Barriers Set consists of four units – see the table for variants-, being able to adjust each of them to the different regulatory heights (0.914 m for men’s events, adults and under-20, 0.838 m for men, under-18, and 0.762 m for women’s events).
Each hurdle is made up of a horizontal beam barrier that is 3.96 / 5.00 m long on the topside and two lower metal bases perpendicular to it, with an inner counterweight made of steel. It includes a telescopic system with a positioning pin and a fastening knob that allows for the top beam barrier to be positioned at the required height.
The top beam barrier, made of pine wood, is reinforced with an inner core made of an 80mm x 80mm square section of an extruded aluminium profile. The aluminium core is equipped, at the bottom, with a groove for mounting the telescopic vertical supports.
This aluminium profile is covered in pinewood on all sides, except on the bottom.
The wood has been painted with exterior paint and the edges are rounded.
The structure of the telescopic vertical supports is painted with powder paint, being applied after a degreasing treatment by means of a pressurised phosphating bath and polymerised in an oven at 200º C.
The steeplechase barriers can also be purchased individually indicating the corresponding reference: AC044-3.96 or AC044-5.00.