YELLOW LED STRIP - END OF POSSESSION

The yellow LED strip is a lighting system for basketball backboards. It is easy to install and connects directly to the shot clock above the basketball backboard Lights up when the shot clock display 00 and remains lit until 24/14 seconds is displayed again. This yellow LED strip is placed horizontally at the top of the basketball backboard. It attaches directly to the red LED strip (MEPK8600) using neodymium magnets, eliminating the need for screws or mechanical fasteners. . One set of basketball backboards requires the purchase of two yellow LED strip units.

• WITH MONDO SHOT CLOCKS: If the shot clocks are MONDO manufactured, the connection is simple and the perimeter red LED strips works correctly synchronized with the shot clocks. In the event that the shot clocks were purchased from MONDO prior to the acquisition of the yellow LED strip units, they must be previously sent to MONDO's Technical Service so that they can be fitted with an electronic board.
• WITH SHOT CLOCKS FROM A BRAND OTHER THAN MONDO: If the shot clock is of another brand than the MONDO yellow LED strip unit, you must contact the technical service of this brand so that they can make the correct connection according to the operation of the shot clock. .

The yellow LED strip is powered by a voltage of 30V and has a power consumption of 24W.