Set of two tennis uprights, aluminium squared profile section


Set of two tennis posts, squared section, designed, manufactured and certified in accordance with the European EN-1510 standard and the regulation in force (by the Institute of Biomechanics of Valencia).

Its special design allows the net to be tightened with a simple mechanism place on one of the posts only.

The posts are made of ribbed squared section aluminium tube. Each post has a double groove on one of its sides. This groove is directed towards the court and has polyamide hooks and a metallic pin which allow the net to be attached. Only one of the two posts in the set contains the net tightening system, the other post being used to attach the net.

The net attachment element and the tightening system are located inside the post. One has a fixed hook while on the other, the tightening one, the hook is moved along a screw with a simple independent handle that is supplied with the posts. Both hooks are covered with an aluminium cap placed at the top of the post.

The posts are anchored to the floor by integrating a 400 mm length squared steel prolongation that protrudes from the bottom part of the post inside the appropriate aluminium profile anchors.

All screws and steel prolongation elements have been submitted to a zinc treatment.

The product is painted with polyester powder paint, which is applied after a degreasing treatment using a pressurized phosphate bath and cured in an oven at 200ºC

Standard colour: white.



Product Sheet

General terms and conditions of sale Mondo S.p.a. (PDF)

Technologies and services