Set of two baskets, designed, made and certificates in accordance with EN-1270 by the IBV (Biomechanics Institute of Valencia).
It is a basket to be fixed on a wall, FOLDABLE manually and with a locking system in the position of use. Each one of them is designed and manufactured according to the specific characteristics of the installation where it is going to be used, for which reason the MONDO Technical Department studies and develops the most appropriate solution for each project.
Manufactured with tubular steel profiles, it consists of the following main structures: rear frame for fixing to the wall, two main folding structures and a front frame for fastening the Backboard and the Rim.
The basket is fixed to the wall by means of the rear frame, with a rectangular shape. This includes the pivot points of the main folding structures, as well as the basket's position locking system. It is attached to the wall by means of six anchor points, using the most suitable type for each case depending on the type of material that makes up the wall (expansive metallic, chemical, etc.).
The two folding structures have a triangular lattice shape, and are made with a rectangular section profile, supporting the entire weight of the Backboard and its own loads during the use of the basket. They are attached at the rear to the rear frame of the wall and at the front to the Backboard. They are fixed in the game position by means of a manual actuation system located on a diagonal telescopic bar that stiffens the whole. When you want to lower the basket, you have to unlock the fixing system, which allows you to move the Backboard to the wall.
The basket can be configured in the installation to fold to the right or to the left, depending on the characteristics of the pavilion. To carry out this folding, the fixing system is unlocked with one of the cranks provided with the basket, while the other one acts on one of the folding structures, guiding the basket towards the wall.
Both the backboard and the rim can be supplied in different options at the customer's choice. The backboard also has a lower padded protection to protect players from possible impacts during the game.
The product is painted with polyester powder, which is applied after degreasing treatment, which takes place in pressurized phosphating bath, and polymerized in an oven at 200 ºC.
All connecting elements have been undergoing to a zinc-plated process.
Note: Two folding handles are supplied for each set of baskets.